Rose Electronics Orion X-series - Manual (Page 64)

56 Orion X Installation and Operations Manual
Modifying Mouse and Keyboard Settings through the Java Tool
 Select Definition > EXT Units in the task area.
Mouse and keyboard settings are made in the OSD Data tab.
Figure 44. Modifying Mouse and Keyboard Settings through the Java Tool
Extender OSD
The Extender OSD settings can be adjusted in this menu. These are local settings that can be set up
individually for each console.
Select between the following Extender OSD settings:
Field Selection Description
Enable Extender OSD Activated Enable Extender OSD (default: YES)
Deactivated Function not active
Update Connections Activated Update connection changes during fade-in of Extender OSD
(default: YES)
Deactivated Function not active
Display Time 0-999 seconds Duration of OSD fade-in (default: 10)
Horizontal Position 10 pixels Horizontal OSD position (default: -2)
Vertical Position 10 pixels Vertical OSD position (default: 2)
Notes:
When setting the horizontal OSD position, a prefixed minus describes the orientation to the right edge
of the monitor, e.g. -2 means 2 x 10 = 20 pixels of distance to this edge. When setting a vertical
position, a prefixed minus describes an orientation to the bottom edge of the monitor.
If the Update Connections function is deactivated, the Extender OSD only appears when switching via
OSD.
This menu can be accessed from the OSD and the Java Tool.