RIGOL MSO/DS1000Z Series - Manual (Page 247)

Chapter 16 Remote Control RIGOL
MSO1000Z/DS1000Z User’s Guide 16-1
Chapter 16 Remote Control
MSO1000Z/DS1000Z oscilloscope can be controlled remotely mainly through the
following two methods.
User-defined programming
Users can program and control the oscilloscope by using the SCPI (Standard
Commands for Programmable Instruments) commands. For more information about
the commands and programming, refer to the MSO1000Z/DS1000Z Programming
Guide .
Use PC software
Users can use PC software to send commands to control the oscilloscope remotely.
Ultra Sigma of RIGOL is recommended. You can acquire Ultra Sigma from the
resource CD in the standard accessories or download the latest version from RIGOL
official website ( www.rigol.com ).
This oscilloscope can communicate with PC through USB, LAN or GPIB (with the
USB-GPIB interface converter provided by RIGOL) instrument bus. This chapter
gives a detailed introduction of how to use Ultra Sigma to control the oscilloscope
remotely through various interfaces.
The contents of this chapter:
 Remote Control via USB
 Remote Control via LAN
 Remote Control via GPIB