RIGOL MSO/DS1000Z Series - Manual (Page 225)

Chapter 14 Store and Recall RIGOL
MSO1000Z/DS1000Z User’s Guide 14-11
Factory
Press Storage Default to return the oscilloscope to its factory state (refer to the
table below).
Table 14-1 Factory
Parameter Factory
Horizontal Setting (HORIZONTAL)
Vertical Setting (VERTICAL)
Acquisition Setting (Acquire)
Trigger Setting (TRIGGER)
Display Setting (Display)
Signal Source (Source)
Cursor Setting (Cursor)
Storage Setting (Storage)
Utility Function Setting (Utility)
Math Operation Setting (MATHMath)
LA
Protocol Decoding (MATH Decode 1/Decode 2)
Reference Waveform Setting (REF)
Horizontal Setting (HORIZONTAL)
Horizontal Time Base
1 μs
Horizontal Offset 0 s
Delayed Sweep OFF
Time Base Type YT
Vertical Setting (VERTICAL)
Vertical Scale
1 V
Vertical Offset 0.00 V
CH1 Switch ON
CH2 Switch OFF
CH3 Switch OFF
CH4 Switch OFF
Channel Coupling DC
Bandwidth Limit OFF
Probe Ratio 10X
Invert OFF
Amplitude Scale Coarse
Channel Unit [V]
Display Label OFF
Template Label CH1
Delay Calibration 0.00 s
Acquisition Setting (Acquire)
Acquisition Mode
Normal