RISCO Group ProSYS – ACM - Manual (Page 4)

4 Advanced Communication Module
Introduction
The ACM (Advanced Communication Module) is a communication
accessory for the ProSYS control panel, for enhancing its hardware and
software connectivity. It enables TCP/IP Ethernet connectivity and
enables usage of existing LAN and WAN infrastructures for the transfer of
security data. The ACM offers full functionality of the ProSYS over
TCP/IP, and provides Ethernet and Fast Modem Interface.
ACM Encryption is of the SSL/TLS type. The module can be
simultaneously accessed by multiple clients and seamlessly connects to
Upload/Download software, thus enabling remote access and monitoring.
ACM versions include:
Ê ACM Basic - includes RS485 and Ethernet interfaces
Ê ACM Basic + Modem - includes Ethernet interfaces plus fast modem
interface
Ê ACM Full future configuration with interfaces is shown in Figure 1.
NOTES:
1. The programming options described in this manual refer to both Universal and UK
ProSYS versions. The UK differences in programming locations are indicated
below the Universal programming options.
2. The ACM AB01 is UL approved only as supplementary and cannot be relied upon
for MS communication , hence the DACT(PSTN) must be the primary
communicator to MS.
Figure 1: ACM Interfaces - Full Configuration