RISCO Group ProSYS – ACM User Manual
Page 12
12
Advanced Communication Module
Quick Key
Parameter
[5][1][1][1][1]
PSTN/VOICE
The ProSYS will report the monitoring station over
the voice channel (PSTN or GSM if connected).
Define the MS (Monitoring Station) telephone
number. Up to 32 digits may be typed in to define
the CS telephone numbers, including dialing
prefixes and area codes or special letters. For
more information refer to the ProSYS Installer
manual.
[5][1][1][1][2]
IP
The ProSYS will report the MS over the TCP/IP
using the ACM.
Define the MS IP address and port that identifies
the receiver on the network.
Note: RISCO IP/GSM receiver has to be at the
MS site
Default: 192.168.001.010
[5][1][1][1][3]
SMS
The ProSYS will report the MS via SMS using
RISCO's GSM/GPRS module. Define the MS GSM
phone number.
Note: RISCO IP/GSM receiver has to be at the MS
site.
Default: 03010
[5][1][1][1][4]
GPRS
The ProSYS will report the MS via the GPRS
network using the GSM/GPRS module. Define the
IP and Port address of the IP/GSM receiver on the
network.
Note: RISCO IP/GSM receiver has to be at the
MS site
Default IP:192.168.001.010
Default Port: 03010
[5][1][2]
U/D PHONES
The phone numbers to which the alarm company’s
computer, equipped with the Upload/Download
software, is connected.