RISCO Group ProSYS – ACM - Manual (Page 16)

16 Advanced Communication Module
Defining the Network Control Parameters
From the Dialer menu [5], press [0][4] to enter the Network Control
parameters Menu.
Quick Key Parameter
[5][0][4]
UK: [8][1][4]
MS KEEP ALIVE
This option contains parameters that specify
counters for the ACM to establish a connection
with the network.
Defining ACM Special Functions
From the Dialer menu [5], press [0][4] to enter the Network Control
parameters Menu.
Quick Key Parameter
[5][0][5]
UK: [8][1][5]
The ACM Special function menu enables you to
perform special operations of the ACM. This option
is applicable for ACM with dedicated features that
are customized per project (e.g. performing remote
upgrade of the ACM).
A confirmation beep is heard in the keypad,
indicating that the command was successfully sent
to the ACM, followed by the following message:
“SPECIAL MESSAGE ACTIVATED”.
Default: 001
Range: 001-255
Viewing ACM Version and Parameters
Quick Key Parameter
[5][0][6]
UK: [8][1][6]
This menu is used to view the ACM hardware and
software configurations.
The information includes 4 parameters as follows:
i ACM MAC Address
i ACM Software Version
i ACM Hardware Version
i ACM Project Number
If a communication trouble with the ACM occurs,
the “COMMUNICATION TROUBLE” message
appears and 3 beeps are heard from the keypad.