RISCO Group ProSYS – ACM - Manual (Page 13)

Advanced Communication Module 13
Defining ACM Parameters
From the Dialer menu [5] press [0][2] to enter ACM Parameters Menu.
(ProSYS UK: [8][1][1])
Quick Key Parameter
[5][0][2][1]
UK: [8][1][1][1]
ACM IP ADDRESS
The static IP address that identifies the ACM
module on the network.
Default: 192.168.001.100
[5][0][2][2]
UK: [8][1][1][4]
ACM U/D PORT
The port address of the ACM U/D application.
Default: 03000
[5][0][2][3]
UK: [8][1][1][5]
ACM AUX 1 PORT
The port address of the ACM AUX. protocol 1. The
ACM AUX 1 protocol supports the Modbus TCP/IP
protocol by default.
Default: 00502
[5][0][2][4]
UK: [8][1][1][6]
ACM AUX 2 PORT
Provision for optional functionality
[5][0][2][5]
UK: [8][1][1][7]
ACM AUX 3 PORT
Provision for optional functionality
[5][0][2][6]
UK: [8][1][1][2]
SUBNET IP MASK
The definition of the network portion of the IP
address. This location must be configured that all
IP addresses up to and including the local gateway
are allowed.
Default: 255.255.255.0
[5][0][2][7]
UK: [8][1][1][3]
GATEWAY IP ADDR
The IP address of the local Gateway, which
enables communication settings to other LAN
segments. This address is the IP address of the
router connected to the same LAN segment as the
ACM module.
Default: 192.168.001.254
[5][0][2][8]-[9]
UK: [8][1][1][8]-[9]
REMOTE UPGRADE of ACM
Remote upgrading allows remote downloading of
upgraded software over the network. The new
upgraded software is stored in a specific IP
address on the network. Once the ACM is
informed of the new software, it refers to the IP
address to download the new software.