Printed(p. 368), Print density is uneven(p. 368), A portion of the page is not printed – Canon i-SENSYS MF244dw User Manual
Page 374: Print density is uneven
Is the drum in the toner cartridge deteriorated?
●
Replace the toner cartridge with a new one.
Replacing Toner Cartridges(P. 386)
Are you printing a document with strong contrasts?
●
Change the setting for [Special Print Mode] using the Printer Driver.
When set to [Special Settings 2], print density is lighter compared with [Off] or [Special Settings 1]. Text and
lines may also appear faded.
A Portion of the Page Is Not Printed
Do you print data without margins?
●
This symptom occurs if a margin is set to none in the printer driver. A margin of 1/4" (5 mm) or less
around the edge of paper or 3/8" (10 mm) or less around the edge of envelopes is not printable with the
machine. Make sure to have margins around the document to print.
[Finishing] tab [Advanced Settings] [Expand Print Region and Print] [Off]
Print Density Is Uneven
Is the amount remaining in the toner cartridge nearly empty?
●
Check the amount remaining in the toner cartridge, and replace the toner cartridges as necessary.
Replacing Toner Cartridges(P. 386)
Is printing sometimes uneven when printing fine lines?
●
Change the setting for
Troubleshooting
368