Canon i-SENSYS MF244dw - Manual (Page 332)

● is set to , , Bond-23 lb Bond)>, , or
After the setting is enabled
Print speed is slower.
Special Printing Mode X
Adjust this setting if streaks adhere to the print paper.
Off
Mode 1
Mode 2
Mode 3
Mode 4
Mode X> Select the mode
Special Printing Mode Z
Adjust this setting if streaks adhere to the print paper output when copying.
Off
Mode 1
Mode 2
Mode 3
Mode 4
Mode Z> Select the mode
After the setting is changed
By specifying or , streaks may adhere to the print paper. By specifying or ,
outlines may be blurred or images may appear somewhat grainy. The print density becomes lighter as the
setting progresses from to .
After printing from a smartphone or tablet
Setting Menu List
326