Canon i-SENSYS MF244dw - Manual (Page 355)

Make Direct Connection (Access Point Mode)(P. 143)
Could not connect using the wireless LAN.
A connection failed due to an error while setting wireless LAN connection.
● Restart the machine and set again.
● If the problem persists even after restarting the machine, check whether the machine is properly installed
and ready to connect to the network.
Installation/Settings Problems(P. 356)
● If the problem persists even after checking the wireless LAN connection, check the security settings of the
wireless router.
Could not connect using WPS.
When automatic setting with WPS was attempted, the connection failed due to an error.
● Wait for a while, and set again. If the problem persists, check whether the wireless router supports WPS.
If WPS is supported:
Check whether the machine is properly installed and ready to connect to the network.
Installation/Settings Problems(P. 356)
If WPS is not supported:
Set using another connecting method.
Connecting to a Wireless LAN(P. 169)
Could not detect any connections from wireless devices.
It was not possible to detect any mobile device within the predetermined length of time.
● Connect again paying attention to the time limit.
Using the Machine in Direct Connection (in Access Point Mode)(P. 143)
Could not perform cleaning.
Paper jammed during cleaning.
● Remove the jammed paper, set paper correctly, and perform cleaning again.
Clearing Jams(P. 341)
Fixing Assembly(P. 383)
Could not perform Shared Key auth. Check WEP settings.
The network key (the WEP key) of a wireless router to be connected is not set to the machine correctly.
● Check the network key (the WEP key) of the wireless router, and set it to the machine again.
Troubleshooting
349