Setting a wait time for connecting to a network – Canon i-SENSYS MF244dw User Manual
Page 216
Setting a Wait Time for Connecting to a Network
1525-042
When a network is designed to enjoy redundant connectivity with multiple switching hubs or bridges, it must have a
mechanism to prevent packets from looping. One effective solution is to define the role of each switch port. However,
communication may still be disrupted for several tens of seconds immediately after you change the way that network
devices are connected, or if you add a new device. If this type of problem occurs, set a wait time for connecting to the
network.
1
Press
.
2
Use
/
to select
.
●
If a screen for entering a PIN is displayed, enter the PIN with the numeric keys and press
the System Manager PIN(P. 228)
3
Select
.
4
Enter the wait time in seconds, and press
.
●
Use
/
or the numeric keys to enter the time.
LINKS
Configuring Ethernet Settings(P. 207)
Changing the Maximum Transmission Unit(P. 209)
Network
210