Canon i-SENSYS MF244dw - Manual (Page 333)

If streaks adhere to the paper, change the setting with .
Special Printing Mode B
Adjust this setting if streaks adhere to the print paper after replacing the toner cartridge or after not printing
for a long period of time.
Off
Mode 1
Mode 2
Mode 3
Mode B> Select the mode
After the setting is enabled
Print speed is slower.
Special Printing Mode C
Adjust this setting if streaks adhere to the print paper.
Off
On
Mode C>
After the setting is enabled
● While more effect is gained than with , print speed is slower.
Special Printing Mode D
Adjust this setting if streaks adhere to the print paper. Also, setting this item to will reduce the operating
noise during printing.
Copy
Off
On
Setting Menu List
327