Canon i-SENSYS MF244dw - Manual (Page 136)

Scan type Color Resolution File format
Color 300 dpi JPEG (Exif)
Black and white *1 300 dpi PDF (searchable *2 )
Color 300 dpi JPEG (Exif)
Color 300 dpi JPEG (Exif)
*1 Documents are scanned in black and white only, with no intermediate shades of gray.
*2 A PDF format where characters on the document are scanned as text data and the text can be searched using a computer.
To change settings
● The settings in the table above are all factory default settings. You can change settings from MF Scan
Utility. For more information, click [Instructions] on MF Scan Utility.
● If you are a Mac OS user, see the User's Guide for ScanGear MF.
6
Press .
● Scanning starts.
● To cancel, press .
You cannot scan while the ScanGear MF is displayed. Close the
screen before scanning.
When placing documents in the feeder in step 1 (MF244dw)
When scanning is complete, the save destination folder is displayed on the computer.
When placing documents on the platen glass in step 1
When scanning is complete, follow the procedure below (when file format is PDF).
1
If there are additional pages of documents to be scanned, place the next document on the platen
glass, and press
.
● Repeat this step until you finish scanning all of the pages.
● When there is only one page to be scanned, proceed to the next step.
2
Use / to select , and press .
● The save destination folder is displayed on the computer.
Using the Machine as a Scanner
130