Canon i-SENSYS MF244dw - Manual (Page 177)

Setting Up Connection Using WPS Push Button Mode
1525-03A
If your wireless router supports WPS push button mode, you can easily set up a connection with a WPS button.
How to operate the wireless router may vary on each device. See the instruction manuals for your networking
device for help.
1
Press .
2
Use / to select , and press .
● If a screen for entering a PIN is displayed, enter the PIN with the numeric keys and press . Setting
the System Manager PIN(P. 228)
3
Select , and press .
● If the message is displayed, select , and press .
● If the message is displayed, select , and press .
4
Read the message that is displayed, and press .
5
Select , and press .
6
Select , and press .
7
Press and hold the WPS button on the wireless router.
The button must be pressed within 2 minutes after pressing in step 6.
● Depending on the networking device, you may need to press and hold the button for 2 seconds or longer.
See the instruction manuals for your networking device for help.
Network
171