Epson EPL-N7000 - Manual (Page 87)

EpsonNet MacAssist Configuration Utility 87
4
4
4
4
4
4
4
4
4
4
4
4
Select the Use the search option check box to search for a print
server in another segment. Do not select it if the print server you
want to configure is located in the same segment.
Enter the network address and subnet mask (valid range 0 to 255).
Ask your network administrator for the address. Then click Add.
You can add up to 20 addresses. To remove the address from the
list, select the address and click Delete.
Select Refresh from the Device menu or restart EpsonNet
MacAssist for the settings to take effect.
Note:
❏ If you try to add an incorrect network address, the “The network
address XXX.XXX.XXX.XXX that you entered will be added to
the list as XXX.XXX.XXX.X. Add this address?” message appears.
Check the correct network address and then click OK to add it.
❏ If you try to add the same network address, the “This network
address has already been registered” message appears, which
indicates this address cannot be added.