Epson EPL-N7000 - Manual (Page 219)

EpsonNet WebAssist 219
10
10
10
10
10
10
10
10
10
10
10
10
1239X Emulation
Text Use this option to set the page length in lines.
CG Table Use the character generator table option to select
the graphics character table, or the italics table.
Country Use this option to select one of the international
symbol sets.
Auto CR Use the automatic carriage return option to
perform a carriage-return line-feed (CR-LF)
operation whenever the print position exceeds
the right margin.
Auto LF When you set AutoLF to Off, the printer does not
send an automatic line feed (LF) command with
each carriage return (CR). When on, the printer
adds a line feed to each carriage return it
receives.
Bit Image With Bit Image set to Dark or Light, your printer
can correctly emulate the graphics densities set
with the printer command. When you select Dark,
the bit image density is high. When you select
Light, the bit image density is low.
Zero Char Select whether the printer prints a slashed zero
or an unslashed zero.
Set button Saves any changes.
Refresh button Clears any changes and reloads the previous
settings.
Items Explanations
Emulation Select 1239X.
Font Select a font.
Pitch Select a character pitch.
Code Page Selects the character tables. Character tables
contain the characters and symbols used in
different languages.