Epson EPL-N7000 - Manual (Page 209)

EpsonNet WebAssist 209
10
10
10
10
10
10
10
10
10
10
10
10
Consumable information
Signal A signal shows the status level. The green light
is on when the printer is idle or printing. The
yellow light is on when the toner or oil roll is low.
The red light is on when the printer is out of paper
or toner, if paper is jammed, the cover is open, or
an error has occurred.
LEDs The LEDs indicates the current operating printer
status when you first turn on the printer, during
normal operation, and when errors occur.
Remote Control Panel
(Start/Stop, FormFeed,
Continue, Reset, and
Warmup buttons) You can control the printer with this Remote
Control Panel functions. You can get the same
result when you click these buttons as pressing
the buttons on your printer. The warnings cannot
be cleared by the Continue button.
Printer image Displays the printer image.
Error information box Displays error/warning information for the printer.
Printer Model Name The model name of the printer.
IP Host Name The IP host name of the printer.
IP Address The IP address of the printer.
MAC Address The MAC address of the printer.
Memory The installed memory size of the printer.
HDD Capacity of the hard disk installed in the printer.
Items Explanations
Total Pages Printed Total number of pages that have been printed.
Color Pages Printed Total number of color pages that have been
printed.
Monochrome Pages Total number of monochrome pages that have
been printed.