Epson EPL-N7000 - Manual (Page 182)

182 EpsonNet Direct Print
4. Click Browse.
5. Select the CD-ROM drive for Drives, and double-click the
appropriate folder for your operating system. Click OK.
6. Click OK in the Install From Disk dialog box.
7. Select the model name of the printer, and click Next.
Note:
If the Add Printer wizard asks you to select either Keep existing
driver or Replace existing driver, be sure to select the Replace
existing driver radio button.
8. Click Finish and follow the on-screen instructions to complete
setup.
Configuring the Printer Port
Follow the steps in the appropriate section below to configure the
printer port. The printing speed will differ depending on the
selections that you make.
Windows Me/98/95/NT 4.0
1. Click Start, point to Settings, and then select Printers.
2. Right-click the target printer and click Properties.
3. Windows Me/98/95: Click the Details tab and then Port
Settings. The EPSON LPR Port dialog box appears.
Note:
If the message “There is nothing to configure for this port” appears
when you click Port Settings, click OK.