Epson EPL-N7000 - Manual (Page 225)

EpsonNet WebAssist 225
10
10
10
10
10
10
10
10
10
10
10
10
DNS Server Address Settings
Host Name and Domain Name Settings
Items Explanations
Acquire DNS Server
Address Automatically Select either Enable or Disable to acquire the DNS
server address from the DHCP server.
DNS Server Address Enter the DNS server address. When the DHCP
server does not respond even Enable is selected
for Acquire DNS server address automatically, the
DNS server address set here is used.
Items Explanations
Acquire Host Name and
Domain Name
Automatically Select either Enable or Disable to acquire the host
name and domain name from the DHCP server.
Host Name Enter the host name supported by Dynamic DNS
(between 2 and 63 characters). The total number
of characters of the host name and the domain
name must not exceed 251.
Domain Name Leave it blank or enter two or more characters of
the domain name. The total number of characters
of the host name and the domain name must not
exceed 251.
Register Network Interface
Address to DNS Server Select Enable if you want to send the host name
and the domain name to the DHCP server that
supports Dynamic DNS update to request for DNS
dynamic updates.
Register Network Interface
Address Directly to DNS
Server Select Enable if you want to directly send the host
name and the domain name to the DNS server
that supports Dynamic DNS update to request for
DNS dynamic updates.When Register the
network interface's address to DNS server is
Disable, then this setting is the same as Disable.