Epson EPL-N7000 - Manual (Page 264)

266 Tips for Administrator
Register the form overlay data on the hard disk
drive
Only a network administrator using Windows XP/2000/NT 4.0
is allowed to register the form overlay data on the optional hard
disk drive, using the following steps.
Note:
❏ The form name must use only the characters shown below.
A - Z, a - z, 0 - 9, and ! ’ ) ( - _ %
❏ Monochrome form overlay data created on a monochrome printer or
printer in the black mode is not displayed.
1. Prepare the form overlay data to register on the local PC Hard
Disk Drive.
2. Log in to Windows XP/2000/NT 4.0 as an administrator.
3. Windows 2000/NT 4.0: Click Start, point to Settings, and then
click Printers.
Windows XP:
Click Start, point to Control Panel, and then
double-click the Printers and Faxes icon.
4. Right-click the EPSON AL-CXXXX Advanced icon and then
click Properties.
5. Click the Optional Settings tab.
6. Click Register. The Register to HDD dialog box appears.
7. Select the form name from the Form Names list, and then click
Register.