Epson EPL-N7000 User Manual

Page 202

202

EpsonNet WebAssist

Note:
If you want to configure a protocol other than TCP/IP, see
“Configuration - Network Screens” on page 223.

4. Select the method for acquiring the IP address. When you

select Auto, DHCP becomes available and assigns an IP
address automatically. If you want to set the IP address
manually, select Manual.

Note:
❏ The network administrator must confirm any changes made to

the IP address settings.

❏ When Auto is selected, DHCP becomes available. To use the

DHCP server, make sure it is installed on your computer and
correctly configured. See your operating system’s online help
for detailed instructions.