Epson EPL-N7000 - Manual (Page 201)

EpsonNet WebAssist 201
10
10
10
10
10
10
10
10
10
10
10
10
❏ If you are using the dial-up environment and not using NetWare,
select Disable in the NetWare screen. If Enable is selected, the extra
account might be charged when you are using the dial-up router.
Follow the steps below to change the IP address using EpsonNet
WebAssist.
1. Turn on your printer.
2. Run EpsonNet WebAssist using one of the following ways.
❏ Run EpsonNet WinAssist or EpsonNet MacAssist. Select
the printer you want to configure from the list and then
click Launch Browser.
❏ Open your browser, and then type in the IP address of the
print server directly. Do not run EpsonNet WinAssist or
MacAssist.
http: //IP address of print server/
Example: http://192.168.100.201/
Note on NetWare setting:
❏ From any NetWare client, log in to the target NetWare server
or NDS context with supervisor privileges.
❏ You cannot create a print server, print queue, or printer with
EpsonNet WebAssist. You must have created these objects
before using EpsonNet WebAssist.
3. Click TCP/IP under Network on the Configuration menu to
view the TCP/IP setting screen.