Epson EPL-N7000 - Manual (Page 77)

EpsonNet WinAssist Configuration Utility 77
3
3
3
3
3
3
3
3
3
3
3
3
Configuring the Print Server Using EpsonNet
WinAssist EasySetup
You can also use EpsonNet WinAssist EasySetup to easily
configure the print server ready for TCP/IP and Microsoft
Network printing within a short time.
Note:
❏ Make sure the printer is turned on.
❏ The computer to use for the following steps must be in the same
segment as the print server.
❏ When you assign an IP address manually, we recommend you use
EpsonNet WinAssist to set the subnet mask and default gateway.
Follow the steps below to configure the print server using
EpsonNet WinAssist EasySetup.
1. Click Start, point to Programs or All Programs
(Windows XP), and then select EpsonNet WinAssist V4. Click
EpsonNet EasySetup to start it.
2. The EpsonNet WinAssist Easy Setup dialog box appears.
Click Next.
3. Read the License Agreement and then click Next.
4. Select the target printer and then click Next.