Epson EPL-N7000 - Manual (Page 270)

272 Tips for Administrator
❏ Specify the print server by using the bind of DHCP function.
❏ Set the exclusive address of the DHCP function.
Note:
❏ Use NetBEUI printing if you do not want to go through these steps.
❏ See the manual of the Dial-Up router for more information on scorp
range, bind, exclusive address of the DHCP function.
Function of Universal Plug and Play
When you connect your printer to the network, the printer is
automatically assigned with an IP address, and the printer's icon
appears in the My Network Places folder. By double-clicking the
printer's icon, you can access EpsonNet WebAssist for basic
information about the printer, such as manufacturer, model
name, location, and administrator’s name.
Right-click the printer's icon in the My Network Places folder and
select Properties. You can check the brief information of the print
server.
To use this function, the Universal Plug and Play must be installed
on Windows Me or future operating systems. For information on
how to install Universal Plug and Play, see the Windows Me
online help.
Note:
Before using the Universal Plug and Play function, you must enable the
Universal Plug and Play function in EpsonNet WinAssist or
WebAssist. See “TCP/IP” on page 60 or “Configuring the Print Server
Using EpsonNet WebAssist” on page 200.