Using hdd form overlay (windows) – Epson EPL-N7000 User Manual

Page 263

Tips for Administrator

265

4. Print a status sheet to check whether the new IP address has

been assigned to the print server.

Note:
When the IP address is set by the ping command, the subnet mask
is automatically changed by the class of the IP address. To change
the subnet mask and the default gateway according to your network
environment, use EpsonNet WinAssist on Windows operating
systems or EpsonNet MacAssist in Macintosh.

Using HDD Form Overlay (Windows)

This function enables faster printing with form overlay data.
Windows users can use form overlay data registered on the
optional hard disk drive installed in the printer. However, only
an administrator can register or delete the form overlay data. You
can access this function from the Form Selection dialog box in the
printer driver.

Note:
❏ This function is not available when the Color setting is set to Black

in the printer driver’s Basic Settings menu.

❏ This function is not available if the optional hard disk drive is not

installed.

❏ Use this function by entering the registered form name after

printing the Print List.

❏ If the document’s resolution, paper size or paper orientation settings

are different from the form overlay data that you use, you cannot
print the document with the form overlay data.

❏ This function is available in the ESC/Page Color mode.