Epson EPL-N7000 - Manual (Page 224)

224 EpsonNet WebAssist
Remote Printer Mode
TCP/IP
IP Address Settings
Items Explanations
Primary Print Server
Name Enter the primary print server name (up to 47
characters).
Printer Port Number Enter the printer port number (0 to 254).
Items Explanations
Method for Acquiring the IP
Address Select a method for acquiring IP addresses. If
Auto is selected, DHCP becomes available. To
use the DHCP server, make sure it is installed on
your computer and correctly configured. See your
operating system’s online help for detailed
instructions.
To set the IP address manually, select Manual.
IP Address Enter an IP address for the print server. Be sure
the IP address does not conflict with any other
devices on the network.
Subnet Mask Set the subnet mask.
Default Gateway Set the gateway address if needed.
Set Using Automatic Private
IP Addressing (APIPA) Select Enable to get a private address between
169.254.1.1 and 169.254.254.254 automatically
when an IP address cannot be obtained by the
DHCP server; otherwise, select Disable.
Set Using PING Enables or disables IP address setting using the
ping command.