Epson EPL-N7000 - Manual (Page 121)

Installing the Printer Driver 121
5
5
5
5
5
5
5
5
5
5
5
5
Using the NET USE command
If you are running Windows 2000/NT/XP and using NetBIOS to
connect to the print server, we recommend that you use the NET
USE command, as follows:
1. Check that the following services are installed.
Right-click the Network Neighborhood icon on the desktop
and select Properties. Click the Services tab and check that
Server or Workstation is listed.
2. If it is not installed, click Add.
3. Run the command prompt and enter the following command.
NET USE printer port: \\NetBIOS name of print server\Device
name of print server
Selecting the port
1. Click Start, point to Settings, and then select Printers.
2. Right-click the printer icon and then select Properties.
3. Click the Ports tab and then select the port you have set with
the NET USE command.
Macintosh
Follow the steps below to set a printer.
Note:
Make sure that the printer driver is installed on your Macintosh before
following the steps below. See the manual shipped with your printer for
instruction on how to install the printer driver.