Emerson Network Router User Manual
Page 37
Installation and Use Manual
31
Using ProLink II Software
Pr
oL
in
k II
Setup
T
ransmitter Star
tup
Usi
ng
Pr
oL
in
k
II
Be
fo
re
Y
o
u
Begin
To enable inventory reset:
1. Choose
View > Preferences
.
2. Select
Enable Inventory Totals Reset
.
3. Click
Apply
(if necessary).
To manage totalizers and inventories:
1. Choose
ProLink > Totalizer Control
or
ProLink > CM Totalizer Control
(if the concentration
measurement application is enabled in the transmitter). See Figure 3-5.
2. Use the buttons in this window to start, stop, or reset the totalizers and/or inventories.
Note: The
Start
,
Stop
, and
Reset
buttons displayed under All Totals affect the mass totalizer, the
volume totalizer, and all API-related totalizers.
3. The
Reset Inventories
button under All Totals is displayed only if this function is enabled
(see above). Use this button to reset all inventories, including API-related inventories.
Note: ProLink II does not support separate resetting of the API volume totalizer and API volume
inventory. To reset these, you must reset all totalizers or all inventories.
Figure 3-5
Totalizer Control window