Epson RX620 - Manual (Page 42)

42 Scanning to a Memory Card
Removing the Film Holder and Document Mat
1. Open the scanner lid and slide out the document mat. Set the mat aside so
you can reinstall it for scanning reflective documents later.
Note:
You must remove the white document mat to scan film or slides.
2. If you’ve stored the film holder in the scanner lid, remove it as shown.
(Remember to replace the film holder when you’re done using it.)
3. Continue with one of these sections:
■ “Placing 35-mm Slides in the Holder” on page 43 (for slides)
■ “Placing 35-mm Film Strips in the Holder” on page 44 (for film)