Scanning film or slides – Epson RX620 User Manual
Page 41
Scanning Film or Slides
41
4. Press the
Scan
button to set the RX620 to Scan mode.
5. Use the u and d buttons to choose
Scan to Memory Card
, then press the
OK
button.
6. Use the u, d, l, and r buttons to select the following options:
■
Scan area
: select
Auto cropping (
if the edges of the photo are light in
color, select
Max area)
■
Document type
: select
Graphics
■
Quality
: select
Photo
7. Press the x
Color
button. The photo is scanned and saved to the “epscan”
folder on your memory card.
8. When scanning is finished, you see a confirmation screen. Note the name
given to your image and its location on the card.
9. Click
OK
when done, then remove the card.
Caution:
Do not remove the card or turn off the Stylus Photo RX620 while the memory card light
is flashing, or you may lose data.
Scanning Film or Slides
After inserting a memory card (see page 39), you can scan film or slides to the card
and save your photos in JPEG format. Follow the steps in these sections:
■
“Removing the Film Holder and Document Mat” on page 42
■
“Placing 35-mm Slides in the Holder” on page 43
■
“Placing 35-mm Film Strips in the Holder” on page 44
■