Sealey VAG505 User Manual
Page 68
66
Figure 6.42
If the tool fails to activate the brakes, please refer to P64-65.
C. Adaptation
The Adaptation is used to enter the new calipers thickness of
rear brake calipers after changing brake discs & pads on
Audi A8 cars.
1) To set new pad thickness, use UP/DOWN scroll button to
select Adaptation from Special Function menu, and press
OK button.
Figure 6.43
2） Wait a few seconds until following screen shows as Figure
6.44. Use the three function key to change the value.
Activate Brake
Activate Brake Done
Press any key to continue
Special Function
1. Deactivate Brake
2. Activate Brake
3. Adaptation
4. Function Test