Sealey AK9636D User Manual

Safety instructions, Introduction & specification

INSTRUCTIONS FOR

ELECTRONIC DIGITAL HEIGHT GAUGE

MODEL No:

AK9636D.V2

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these

instructions and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL

REQUIREMENTS, WARNINGS, AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE,

FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE

AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY.



WARNING! Ensure Health and Safety, local authority and general workshop practice regulations

are adhered to when using tools and equipment.



CAUTION! Some edges, in particular the scribe are sharp and caution should be used when

handling, store safely in the storage case when not in use.

✗

DO NOT use the gauge if damaged.

✓

Maintain the gauge in good and clean condition for best and safest performance.

✓

Keep the work area clean, uncluttered and ensure there is adequate lighting.

✓

Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.

✓

Remove ill fitting clothing. Remove ties, watches, rings and other loose jewellery. Contain or tie back long

hair.

✓

Keep children and unauthorised persons away from the work area.

1. SAFETY INSTRUCTIONS

2. INTRODUCTION & SPECIFICATION

Precision ground base with 6 button electronic gauge. Includes fine adjustment control carriage for accurate

use. 6-Digit LCD read-out displays in metric or imperial. Supplied with scriber foot and clamp. Powered by

CR2032 battery (included) and supplied with storage case.

1 Power switch

2 mm / inch selection

3 Relative / Absolute

4 Zero setting button

5 + preset button

6 - preset button

A Scale

B Beam

C Fine adjustment

D LCD Display

E Fastening Screw

F Battery lid

G Base

H Scribe

Operating temperature: 0 - 40ºC

Storage temperature: -20 - 70ºC

Max. relative humidity: 80%

Fig 1

D
E

F
G

Measuring range: 0 - 300mm / 0 - 12in

Accuracy:

0.03mm / 0.0012in

Resolution:

0.01mm / 0.0001in

Repeatability:

0.01mm / 0.0005in

AK9636D.V2 ISSUE No.1 - 20/02/09