beautypg.com

Sealey AK9621EV User Manual

Digit, Fig 1

background image

INSTRUCTIONS FOR:

MODEL:

AK9621EV

AK9621EV

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and
properly maintained, give you years of trouble free performance.

IMPORTANT PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS, AND
CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE, FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO
MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY.

!

WARNING! Ensure Health and Safety, local authority and general workshop practice regulations are adhered to
when using tools and equipment.

"

DO NOT use AK9621EV if damaged.

#

Maintain AK9621EV in good and clean condition for best performance.

#

Keep the work area clean, uncluttered and ensure there is adequate lighting.

#

Keep children and unauthorised persons away from the work area.

"

DO NOT use the AK9621EV for any purpose other than for which it is designed.

"

DO NOT get AK9621EV wet or use in damp or wet locations, or areas where there is condensation. Keep AK9621EV clean
and dry using a dry cotton cloth only.

"

DO NOT dip or submerge the AK9621EV in any type of liquid.

"

DO NOT expose AK9621EV to bright sunlight or dust.

"

DO NOT dis-assemble AK9621EV. The AK9621EV must be checked by qualified service personnel only.

"

DO NOT apply any voltage to the AK9621EV i.e. with an electric marker pen.

#

The AK9621EV is a precision instrument, treat with care, avoid using force and do not subject to knocks or shocks.

#

Use AK9621EV in reasonably constant temperature conditions of approximately 20

O

C.

#

When not in use, turn off and store gauge in a safe, dry, childproof location.

1.

SAFETY INSTRUCTIONS

2.

INTRODUCTION & SPECIFICATION

AK9621EV - 1 - 290307

Hardened and tempered stainless steel digital calliper with satin finish. Large LCD display with 11mm high figures for ease of
reading. Metric and Imperial calibration with conversion between the two. Zero setting control allows comparative measurement.
Supplied in robust storage case.

DIGIT

DIGIT

AL

AL

VERNIER CALLIPER 0-150

VERNIER CALLIPER 0-150

mm

mm

/0-6”

/0-6”

1

Internal Measure

5

LCD Display

9 Battery Cover

2

On\mm\inch Button

6

External Measure

10 Depth Measure

3

Locking Screw

7

Off Button

11 Step Measure

4

Fine Adjust Wheel

8

Zero Button

Specification
Resolution 0.01mm (0.0005”)
Range 0-150mm (0-6”)
Accuracy ±0.03mm/0.001”
Functions Zero set, mm/inch select, incremental zero.
Messages Flashing display = replace battery
Battery life Approx. two years (approx. one year in continuous service)
Battery SR44 - 1.5V
Operational Temperature range 0 - 40

O

C

Fig 1