Sealey VAG505 - Manual (Page 13)

11
2) Find DLC on vehicle.

A plastic DLC cover may be found for some vehicles and you
need to remove it before plugging the OBD2 cable.
3) Plug the OBD II Cable to the vehicle’s DLC.
4) Power up the scan tool, and wait for the Main Screen to
appear.(Figure 3.1)
Figure 3.1
3.6 System Setup
The System Setup functions allow you to adjust default settings and
view information about the scan tool.
1) Language: Selects the desired language.
2) Unit of measure: Sets the unit of measure to English or Metric.
3) Beep Set: Turns on/off beep.
4) Key Test: Checks if the keyboard is working properly.
5) LCD Test: Checks if the LCD display is working properly.
6) About: Provides information of the scan tool.

Settings of the unit will remain until change to the existing
settings is made.
To enter the Setup menu
From the Main Screen: Use LEFT/RIGHT scroll button and
UP/DOWN scroll button to select Setup, and press the OK button.