Epson VIGOR 3300 - Manual (Page 24)

Vigor3300 Series User’s Guide 20
2 2 . . 2 2 . . 5 5 P P P P T T P P
This mode lets user get the IP group information by a DSL modem with PPTP service from
ISP. Your service provider will give you user name, password, and authentication mode for a
PPTP setting.
If your ISP offers you PPTP (Point-to-Point Tunneling Protocol) mode, please select PPTP
for this router. Next, enter the PPTP Subnet Mask (e.g., 255.255.255.0), PPTP Local
Address (e.g., 10.66.99.88) and PPTP Remote Address (e.g., 172.66.99.88) provided by
your ISP on the web page.
PPTP Local Address Assign a local IP address of PPTP.
PPTP Subnet Mask Assign a net mask value for IP address of PPTP.
PPTP Remote Address Assign a remote IP address of PPTP server.
After setting up the WAN interface, the user can click Next to setup the LAN interface
continuously.