Extron Electronics RGB 168xi - Manual (Page 8)

Introduction, cont’d
RGB 168xi xi xi xi xi • Introduction
Introduction
About this Manual
This manual contains information about the RGB 168xi
universal analog interface and how to operate and
configure it.
About the RGB 168xi xi xi xi xi
The RGB 168xi is a computer-video and stereo audio
interface with 300 MHz (-3dB) video bandwidth. This
interface has a horizontal frequency range of 15 kHz to
125 kHz, so it can be used with any type of analog
computer signal, including those from VGA to UXGA-2,
Mac, Quadra, Sun, and SGI computers.
Features
This section highlights the main features of the RGB 168xi
interface. See the installation chapter for a detailed
description of front and rear panel features.
Internal power supply — Uses a standard IEC power cord.
Front panel AC outlet — Peripherals or laptop computers
can be plugged into the unswitched front panel AC
outlet for a convenient power connection. This
feature is not available in Europe.
Furniture and rack mountability — The RGB 168xi can be
mounted under a desk or podium with optional
hardware, or it can be mounted in a rack or through
a desk or other furniture with included vertical
mounting brackets.
Active stereo audio — Unbalanced stereo audio input via a
front panel jack is output as balanced, line level
stereo audio on the rear panel captive screw
connector.
Horizontal shift control — The interface features front
panel horizontal centering control.
Sync stripping — Incoming sync will be stripped from the
red, green, and blue signals.
RGBHV, RGBS, or RGsB output — RGBHV can be output
simultaneously with RGBS. Sync on green (RGsB)
output can be DIP switch selected.
Advanced Digital Sync Processing ™ (ADSP ™ ) — ADSP
allows sync processing operations, such as horizontal
centering, to occur without affecting the signal’s sync
timing. This allows horizontal centering to be
applied to signals that are output to digital display
1-2