Extron Electronics RGB 168xi - Manual (Page 33)

RGB 168xi xi xi xi xi • Specifications, Accessories and Part #s A-3
Audio
Gain ................................................ Unbalanced output: 0 dB; balanced output
+6 dB
Frequency response .................... 20 Hz to 20 kHz, ±0.05 dB
THD + Noise ................................. 0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal
level
S/N ................................................ >72 dB, at maximum output (14 dBu),
balanced (unweighted)
Stereo channel separation .......... >66 dB @ 1 kHz to 20 kHz
Audio input
Number/signal type ................... 1 PC level stereo, unbalanced
Connectors ................................... (1) 3.5 mm stereo jack, 2 channel; tip (L),
ring (R), sleeve (ground)
Impedance .................................... 5k ohms, DC coupled
Nominal level ............................... -10 dBV (316 mVrms)
Maximum level ............................ +4.2 dBu, (unbalanced) at 1% THD+N
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu
Audio output
Number/signal type ................... 1 stereo (2 channel), balanced/unbalanced
Connectors ................................... (1) 3.5 mm captive screw connector, 5 pole
Impedance .................................... 50 ohms unbalanced, 100 ohms balanced
Gain error ..................................... ±0.1 dB channel to channel
Maximum level (600 ohm) ......... >+8.8 dBm, balanced at 1% THD+N
General
Power ............................................ 100 VAC to 240 VAC, 50/60 Hz, 15 watts,
internal
MBC power jack .......................... 9.0 VDC, 150 mA
Temperature/humidity .............. Storage: -40 to +158 °F (-40 to +70 °C) /
10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) /
10% to 90%, noncondensing
Rack mount .................................. Yes, with included kit, #70-077-03
Furniture mount .......................... Yes, with optional kit, #70-077-01 (under
desk), or
included kit #70-077-03 (through desk/
rack mount)
Enclosure type .............................. Metal