Extron Electronics RGB 168xi - Manual (Page 32)

Specifications, cont’d
RGB 168xi xi xi xi xi • Specifications, Accessories and Part #s
Specifications, Accessories, and Part #s
A-2
Video
Gain ................................................ Unity, (0.725 Vp-p) 50% peaking,
(0.75 Vp-p) 100% peaking
Bandwidth ..................................... 300 MHz (-3 dB)
Video input
Number/signal type ................... 1 analog RGBHV, RGBS, RGsB, RsGsBs
Connectors ................................... 1 female 15-pin HD
Nominal level ............................... 0.7 Vp-p for RGB
Minimum/maximum levels ....... Analog: 0.3 V to 1.5 Vp-p with no offset at
unity gain
Impedance .................................... 75 ohms
Horizontal frequency .................. Autoscan 15 kHz to 130 kHz
Vertical frequency ....................... Autoscan 30 Hz to 120 Hz
Return loss .................................... -30 dB @ 5 MHz
DC offset (max. allowable) ......... 4.0 V
Video output
Number/signal type ................... 1 analog RGBHV, RGBS, RGsB
Connectors ................................... 6 female BNC
1 female 15-pin HD local monitor buffered
output
Nominal level ............................... 0.7 Vp-p for RGB
Minimum/maximum levels ....... Analog: 0.7 V to 0.75 Vp-p with 0.70 Vp-p
input
Impedance .................................... 75 ohms
Return loss .................................... -30 dB @ 5 MHz
Sync
Input type ..................................... RGBHV TTL (±), RGBS TTL (±),
RGsB 0.3 V (-), RsGsBs 1.3 V (-)
Output type .................................. RGBHV (±), RGBS (±), RGsB (-)
Input level ..................................... 2 V to 5.5 Vp-p with ±0.2 VDC
offset (max.)
Output level .................................. 4 V to 5 Vp-p, unterminated
Input impedance .......................... 510 ohms
Output impedance ....................... 75 ohms
Max. propagation delay .............. 48 ns
Max. rise/fall time ....................... 3.5 ns
Polarity .......................................... RGBHV: when RGBHV is input, polarity
follows input; otherwise negative
RGBS, RGsB: negative