Extron Electronics RGB 168xi - Manual (Page 22)

RGB 168xi xi xi xi xi • Installation and Operation
Installation and Operation, cont’d
2-12
HIGH VOLTAGE CAUTION
Adapter Plate
Tighten nuts
securely
UNSWITCHED
600 W
ATTS
MAX.
Cable Routing
RGB 168 xi
INPUTS
AUDIO
ANALOG
MIN/MAX
UNIVERSAL INTERF
ACE
W /ADSP
ID PIN 14 ID PIN 11
BUFFERED LOCAL
MONIT OR OUTPUT
Routing adapter output cables and
attaching adapter plates
6 . Insert the adapter plate screws through the holes in the
interface front panel, as shown above. Attach the
adapter plates to the enclosure with the provided
captive washers and #4-40 nuts.
7 . Gently pull excess cable(s) out the rear panel cable
clamp openings or, if a rear panel output adapter plate is
being used, connect the cable(s) to the plate
connector(s). Do not strain or damage the cable-
adapter connections.
8 . Fasten the cables in place by tightening the screws on
the cable clamps provided on the rear panel openings.