Casio MPC-701 - Manual (Page 97)

95
2
When Two Battery Packs Are Mounted
When two battery packs are mounted, the hot-swapping function
allows either of the two battery packs to be replaced while the other is
in use even if FIVA is turned on.
About charging
Charging is started from the battery pack having more remaining
power. So, check the charging state by the color of the BATT1/BATT2
indicator lamps.
When the battery pack being charged becomes fully charged,
charging of the other battery pack is started.
If the battery pack standing by to be charged is replaced with a
battery pack that has more remaining power than the battery pack
being charged, the battery pack to be charged will not be changed.
When Replacing Two Battery Packs
Connect the AC adapter when replacing two battery packs at the
same time.
Also, prepare two charged battery packs, and wait until the first
replaced battery pack has been detected by the FIVA before
replacing the second battery pack.
MPC701M50E#p85~96 02.11.6, 5:53 PM 95