Charging the battery pack – Casio MPC-701 User Manual

Page 36

Charging the Battery Pack

The AC adapter is used not only to supply power from the AC power
outlet but also to charge the battery pack. The battery pack is also
charged while FIVA is in use (power is on) if the AC adapter
(provided) is connected with the battery pack inserted in the FIVA
unit. Unwanted power consumption can be prevented and safety
ensured if the power outlet side of the AC adapter also is
disconnected when the AC adapter is not connected to the FIVA unit.

N o t e

• When you buy the battery pack, it is not fully charged. Fully

charge the battery pack before you use it for the first time.

• Before you use a new battery pack for the first time, fully charge

it, disconnect the AC adapter from the FIVA unit, and then
completely use up battery pack power. Though the battery pack
can be used without doing this, the indicated remaining power of
the battery pack may be inaccurate.

1. Attach the battery pack following the procedure above.
2. Attach the AC adapter to the FIVA unit following the procedure

above (q

→w→e).

FIVA’s

lamp (BAT1 or BAT2) lights amber when charging starts,

and turns green when charging is complete. If the

lamp lights red

during charging, it can mean that FIVA’s protection circuit has
cancelled the charge operation. If this happens, remove the battery
pack from FIVA and then reattach it to resume charging. The

lamp

lights red frequently during charging indicates malfunction, and you
should contact your original dealer or authorized distributor.

Use only the dedicated AC adapter, model no. AD-
S60160A-E. Use of other type of AC adapter creates
the danger of fire caused by smoking or ignition.

MPC701M50E#p23~35

02.11.22, 10:11 AM