Casio MPC-701 - Manual (Page 14)

12
Important
Avoid Strong Vibration and Impact
• Strong vibration or impact can cause malfunction. Be particularly
careful when FIVA is turned on. Vibration and impact can cause
corruption of data on built-in hard disk.
• Do not press down hard on the periphery of the screen. If any entry field
near the periphery, right or left side of the screen as shown, suppose to
be located, the area may be activated accidentally by the pressure.
Do not press down hard
on these sections.
FIVA conforms to drip-proof specifications.
• This means that it can be used in locations where it is subjected to
slight amounts of rain or spraying with water. However, if FIVA gets
wet, sufficiently wipe off rain or water droplets with a dry cloth.
Hard Disk Data
• The hard disk drive can be damaged by shock. The exchange of
the hard disk sometimes becomes necessary when strong
vibration or impact are given to it though a hard disk is protected
due to the shock absorption material.
Disk Operations
• A lit hard disk drive access lamp ( ) indicates that a disk operation
is being performed.
• Never shut down while a hard disk drive is being performed. Doing
so can make data or applications on the disk unusable.
Backup Data
• You should occasionally back up data on the hard disk by copying
it to floppy diskette. This ensures that you always have backup data
on hand in case of accidental data deletion or corruption caused
by mis-operation, malfunction, maintenance, etc.
Note that CASIO is not liable for any losses suffered by you or any
third party due to the loss of data stored on FIVA’s hard disk.
MPC701M50E#p1~20 02.11.22, 10:09 AM 12