Casio MPC-701 - Manual (Page 128)

126
Power Management Setting
This allows you to prolong the using time of the battery pack when you
change the settings of the Suspend Mode, CPU, hard disk and the LCD
monitor and the power supply according to the conditions. (This function
is called “Power Management”.)
To make the change of the using condition easier, the three modes of
“FULL POWER”, “NORMAL” and “ECONOMY” are provided. And, for
the power, the two modes of “USER AC” and “USER DC” are provided.
The three modes and the two modes can be specified respectively. The
following items can be specified. In this window, the power management
setting for the system and the devices can be specified by selecting
“USER AC” or “USER DC”, and the setting for this unit can be specified
by selecting “FULL POWER”, “NORMAL” or “ECONOMY”.
• The time until this unit enters the Suspend Mode after the unit is not
used.
• The speed of CPU (Long-Run setting)
• The time until the function of hard disk stops after the unit is not used.
• The brightness of the display
• The time until nothing is displayed in the LCD monitor after the unit is
not used.
Important
You can also specify the power management setting of this unit by
selecting “Control panel”
→ “Power Options” → “Power Options
Properties”.
Normally, you should specify only the setting of the “Power
Management Setting” in the Mobile Cockpit because it is easier to
operate.
MPC701M50E#p118~135 02.11.22, 10:16 AM 126