Casio MPC-701 - Manual (Page 120)

118
Using the “Mobile Cockpit #”
The CASIO original application software “Mobile Cockpit3” is installed
in this unit. The “Mobile Cockpit3” is always displayed as a tool bar on
the desk top of the Windows and it allows you to perform the convenient
settings easily. When the “Mobile Cockpit3” is not displayed on the
screen, click
in the indicator area to start up.
* After this, “Mobile Cockpit3” is described as the mobile cockpit.
Description
Switches the display between the “Control
bar” and the “Launcher bar”
Changes the arrangement of the tool bar
or hides the display.
Specifies the “One Touch Operation
Buttons”, “Wake On Timer Setting”, “Power
Management Setting” or “Settings
(Preferences)”.
Set to each of the “Full power”, “Normal”,
“Economy” or “User”.
Adjusts the brightness of display.
Setting LAN use at multiple locations
enables the LAN to be used easily at
different locations.
Adjusts sound level from the speaker
Specifies the settings to use the PC or CF
card.
Changes the speed of CPU.
Set the warning for a low battery or
displays the information about a battery.
Displays the remaining power, installation
state, etc.
Set this unit to the Standby Mode.
Set this unit to the Hibernation Mode.
Page
119
122
125
130
130
131
131
132
132
133
134
135
135
Function
q Switching the
tool bar
w Panel
e Settings
r Power
management
t Brightness
control
y LAN
connection
switch
u Adjusting the
volume
i PC card
properties
o Long-Run
setting
!0 Battery Control
!1 Battery
indicator
!2 Standby Mode
!3 Hibernation
Mode
Button
q w e r t y i u !2 !3 !0 !1 o
MPC701M50E#p118~135 02.11.22, 10:16 AM 118