Casio HA-D95HB - Manual

This instruction shows how to attach the Hand Belt on the IT-600.
Hand Belt (HA-D95HB) Instruction
After reading this instruction, keep it in a safe place for future reference.
E
Items Included
Attaching the Hand Belt
Attach the hand belt as described below.
1
Turn the IT-600 over.
2
Attach the hand belt on the back of the IT-600 and
fasten the enclosed screws (3pcs).
3
Attach the strap using the strap hole in the bottom of
the IT-600.
4
Feed the hand belt through the strap, fold it back and
secure it with the Velcro fastener. Adjust the belt to a
comfortable length.
5
You can also use the strap to hold the stylus when
required, as shown in the figure.
Note on Using the Hand Belt
••••• Before loading the IT-600 with the hand belt attached
onto cradle, loosen the belt as shown in the figure
so that it does not get caught between the IT-600 and
the cradle.
• Hand Belt
• Screws (3)
• Strap