Casio MPC-701 - Manual (Page 136)

134
!1 Battery indicator
The battery indicator indicates the battery pack remaining power and
installed state at all times.
When running FIVA by the battery pack only
• The display differs when only battery pack is installed and when two battery
packs are used.
For one battery pack For two battery packs
When two battery packs are installed
• The average value of the total battery power is displayed as the
remaining power. However, the level indicator shows each of their
battery powers.
• The order of battery pack use will not change even if the battery pack
is replaced with one having more remaining power.
As the battery pack currently in use wears down and the remaining
power of the two battery packs become the same, both wear down at
the same rate.
When using the AC adapter and battery pack
• If the AC adapter is connected, the battery packs will be charged all
the time. Regarding the order of priority in charging the battery packs,
charging will start with the battery pack having the larger amount of
remaining power. This order will not change even if one of the battery
packs is replaced during charging.
When running FIVA by the AC adapter only
• This is displayed when the battery pack is not installed.
CALCULATE
• “CALCULATE” appears right after the battery pack is installed. If this
message remains to be displayed, install the battery pack once again,
or the replacement with a new battery pack is required because of
the exhaustion of the battery pack.
Remaining power compensation in progress
• This is displayed when processing for improving accuracy in
measurement of the battery pack remaining power is being carried out.
MPC701M50E#p118~135 02.11.22, 10:16 AM 134