Emerson P/N 400361-00 - Manual (Page 49)

Configuring an Application www.emersonct.com 35
7.2.2.6 SM-DeviceNet Module View
If DeviceNet is selected in the Slot # Module combo box,
the remainder of the view should have configuration
parameters to define the properties of the DeviceNet
device and network. The hierarchy should automatically
update to show that a DeviceNet module is populated in
that specific slot, see Figure 59.
Figure 59: Slot # View (SM-DeviceNet Module)
7.2.2.7 SM-Profibus DP Module View
If Profibus DP is selected in the Slot # Module combo box,
the remainder of the view should have configuration
parameters to define the properties of the Profibus device
and network. The hierarchy automatically updates to show
that a Profibus module is populated in that specific slot, see
Figure 60.
Figure 60: Slot # View (SM-Profibus DP Module)
7.2.2.8 Applications Plus Module View
If Applications Plus is selected in the Slot # Module combo
box, the remainder of the view should be blank. The
hierarchy automatically updates to show that an
SM-Applications Plus module is populated in the specific
slot, see Figure 61.
Figure 61: Slot # View (SM-Applications Plus Module)
7.2.3 Unidrive SP Parameters View
This view allows the user to view the online value of all the
Unidrive SP menu parameters as well as modify the value
of a menu parameter. Figure 62 shows an example of the
Unidrive SP Parameters view.
Figure 62: Unidrive SP Parameters View
To the view the menu parameters, PowerTools Pro must
upload the parameter values. To upload the parameters,
click on the "Get Menu Values" control button on the right