Epson 900N - Manual (Page 58)

51
Changing Your Port Setting
Follow the steps below to change the port setting. In Windows NT 4.0, make sure the
TCP/IP Print Server service is running before you start.
1. Click Start , point to Settings , and click Printers .
2. Right-click the EPSON Stylus COLOR 900N printer icon.
3. Select Properties .
4. In Windows 98 or Windows 95, click the Details tab.
In Windows NT 4.0, click the Ports tab.
5. Click Add Port .
6. In Windows 98 or Windows 95, click Browse and choose the server or
EPSON_TCPIP_Printer that your printer is set up on. Then click OK .
In Windows NT 4.0, click LPR Port , then type the printer’s IP address and the
name you want to assign. Click OK , Close , and OK again.
Installing in Windows 3.1x
1. Make sure Windows Program Manager is running and exit any open application
programs.
2. Insert the printer software CD-ROM.
3. Open the File menu and select Run .
4. Type D:\EPSETUP (where D: is the drive letter of your CD-ROM) and click OK .
You see the Software Installation screen (shown on page 50).
5. Highlight Install Printer Driver and click the right arrow button .
6. Click OK to install the software.
Your printer is automatically set to your local port, LPT1. You need to change it to
follow the network path to your printer. See the section below.
clients.fm Page 51 Friday, February 19, 1999 4:01 PM