Epson 900N - Manual (Page 117)

110
13. Follow steps 2 through 10, using the same settings you used in those steps.
14. When the Setup Complete screen appears, select Yes and click Finish .
15. After you restart your computer, right-click the green background monitoring
icon in your Startup group on the taskbar. Click Stop monitoring now .
This turns off background monitoring, which may interfere with EPSON Net!2
when you configure the card. (See page 95 in your electronic EPSON Stylus
COLOR 900N Manual or Chapter 11 in your Administrator’s Manual to turn on
background monitoring.)
If you install Status Monitor 2 on additional workstations, or
you are not using EPSON Net!2, you do not have to turn off
background monitoring. You should limit the number of
systems that monitor the printer, however, to prevent
network traffic problems.
Installing the Printer Driver in Windows
Follow these steps to install your printer driver:
1. Insert diskette 1 in your drive.
2. In Windows 98, Windows 95, or Windows NT 4.0, click Start , then click Run .
In Windows 3.1x, select Run from the File menu in Program Manager.
3. Type A:\Setup (where A: is your diskette drive letter).
4. Click OK and follow the instructions on the screen to install your printer driver.
Your printer is automatically set to your local port, LPT1. You need to change it
to follow the network path to your printer by adding a port as described on
pages 51 and 52.
For basic instructions on using your printer driver, see
page 59.
diskette.fm Page 110 Friday, February 19, 1999 4:03 PM