Epson 900N User Manual

Page 31

Follow these steps to install Status Monitor 2:

1. Insert the printer software CD-ROM. You see the following screen:

If the screen does not appear, type

D:\EPSETUP

(where

is the drive letter of

your CD-ROM) and click

to start the EPSON Installation program.

2. Highlight

Install Status Monitor 2 for Network

and click the right arrow

button

3. Close any open programs and click

. A screen appears asking where you want

to install Status Monitor 2.

4. Click

to accept the default directory or choose a different directory and click

5. If you are using Windows 98 or Windows 95 and you have TCP/IP installed, you

see a screen asking you if you want to enable EPSON TCP/IP printing. Select

Yes

if you want to print with TCP/IP, and then click

TCP/IP Printing: Yes_______ No_______

6. Select the type of printer(s) you want to monitor and click

Monitor: EPSON TCP/IP printers______ Windows shared printers _____
NetWare printers______ local printers_______

instconf.fm Page 24 Friday, February 19, 1999 4:00 PM